You are here: Species – Curmaru Gäte Hardwood Floors, Inc.

Curmaru
Appearence
Color: Sapwood is gray-white; heartwood is salmon red to orange-brown when fresh, and becomes russet or reddish brown when seasoned; often marked with dark streaks.

Grain: Mostly interlocked; texture is medium to rather coarse.

Variations Within Species And Grades: Moderate to high color variation.

Properties
Hardness/Janka: Average of 2820(119% harder than Northern red oak)

Dimensional Stability: Average (8.5; 1% more stable than Northern red oak). However, actual installations have shown significant movement. Longer-than-normal acclimation time is recommended.

Workability
Sawing/Machining: Sawing is difficult due to high density; requires frequent resharpening of tools. Planing is difficult due to interlocked grain. Can be machined to a smooth surface. Carbide tooling recommended.

Nailing: Due to hardness it is very important that the angle of penetration be adjusted carefully. If using a pneumatic nailer, the air pressure should be adjusted.

Sanding: Scratches are easily seen. Each sanding must carefully remove the scratches from the previous cut, or sanding marks will be visible in the finish.

Finishing: Coating with oil-modified polyurethane may occasionally cause white spots or specks, as well as white end joints, to appear. This may be avoided by buffing in a clear oil sealer or neutral stain, then buffing on satin polyurethane.

Origin: South America

>> Back to Species